Time & Attendance Reader
  BF399I
  BF399I Plus
  BF5
  BF5I
  BF5IPlus
  BF5C_ID (125KHz card)
  BF5C_IC (13.56MHz card)
  BF5C_IC/RW (Mifare I card)
Read/Write Card
  BF5C_HID (HID Card)
  BF5U (USB flash disk)
  BF2
  BF2C_ID
  BF2C_IC
  BF2C_HID
  RF5_ID
  RF5I_ID
  RF5I Plus
  BF40AC
  BF41AC
Access Controller System
  BF808I
  BF909
  BF42ID
  BF40ID
  BF399I
  BF399I Plus
  BF5
  BF5I
  BF5IPlus
  BF5C_ID (125KHz card)
  BF5C_IC (13.56MHz card)
  BF5C_IC/RW (Mifare I card)
Read/Write Card
  BF5C_HID (HID Card)
  BF5U (USB flash disk)
  BF2
  BF2C_ID
  BF2C_IC
  BF2C_HID
  RF5_ID
  RF5I_ID
  RF5I Plus
  BF40AC
  BF41AC
FingerPrint door lock
  BF400
  BF400N
Fingerprint safe box
  BF601
     
 
Home >> Product >> BF909
BF909 - Simple Access Relay box
 

When you do Access control Project, you need the relay to drive the E-LOCK.

There are lots of different kinds of the Access Relay box in the market too. Our BFLEX Access Relay box can support not only to all BFLEX readers, but also to other reader in the market.
Why need the Access Relay box?
Because there are lots of the Access Control Devices in the market can support different functions. But most of them need the Relay to control other devices.
So for the professional Access Project, you need the relay,
BFLEX Relay box can support BFLEX devices very well.

Specification for BF909
Weight Approx. 0.5Kg (without backup battery)
Dimensions 120mm*60mm*25mm
MCU Speed 22 MHz
Connector

Two pins for EXIT BUTTON
Three Pins for E-lock ( NO,COM,NC)

Two pins for DC12V output with COM together to the LOCK.
One connector for DC12V input
One switch to set the relay output 12V DC power directly or relay signal only.
One RJ45 port for Wiegand 26 input.

Power Supply 12VDC@1.5A
Backup Battery Support the extra backup battery.
* This model offers ONE year warranty period for manufacturing defects.
Installation of solution A: Connecting by Push button
Installation for BF909 on Solution A (VIA Push button)
The connectors from Relay on BFLEX devices
 
Installation of solution B: Connecting by Wiegand 26
Installation for BF909 on Solution B (VIA Wiegand 26)
The connectors from Wiegand 26 output port on BFLEX devices
  BFLEX Automated System Co. Ltd Copyright (c) 2002-2012 , All rights reserved